Cleveland Series with 1-3/4 Thick Oiled 100% Solid Maple Hardwood Top.
Cleveland Series with 1-3/4 Thick Oiled 100% Solid Maple Hardwood Top.	Cleveland Series with 1-3/4 Thick Oiled 100% Solid Maple Hardwood Top.	Cleveland Series with 1-3/4 Thick Oiled 100% Solid Maple Hardwood Top.
BENCH-C-TOPS-MAPLE-SQ.jpg
 

Compare:

  • Meet ANSI, BIFMA, DIN and GSA Structural Standards.
  • Ergonomic Comfort and Productivity.
  • 2,500 Lbs. Capacity Apron (Strong Cold Rolled Steel).
  • America's High Quality Bench.
  • 25-Year Unconditional Warranty.
  • Assemble with Only 4-Bolts. (one Per Leg)
  • Factory Assembly Available.
  • Save Over 60% On Shipping With This Model.
  • Butcherblock Grading
  • Available 24”, 30”, 36”, 48” Deep and Custom.

 

!Butcherblock Care Instructions

 
 
 
 
           
STD Paint
Click to enlarge
...
...
...
STD BlackStorm GrayWhite
...
...
...
STD BlueDark BlueBeige
24" Deep Tops

Need a special height or size? We'll do it at the standard price.

Dimensions
D x L
Model
Quantity
12-45-910-2425+
Weight
24" x 24"CW2424
$241$223$215$210$206
$269$250$240$235$231
$298$277$266$260$255
$355$330$317$310$304
$414$384$370$361$355
$472$438$422$412$404
88
24" x 30"CW2430110
24" x 36"CW2436120
24" x 48"CW2448132
24" x 60"CW2460154
24" x 72"CW2472176
Lead Time: Blue 1 Day, Green 1-5 Days, Orange 5-10 Days, Black 10 + Days.
Larger & Custom Orders Take Up to 14 Days.

Preferred for its hard surface, beauty and durability, the Solid Maple Butcherblock used by BenchPro™ is made from 1-3/4 thick strips of genuine Maple Hardwood. To prevent warpage and splitting, the wood is dried in a low-heat atmosphere for almost one year before it is cut into strips and glued edge to edge. The hardwood strips vary in width so that some strips are single and some strips are double wide. This gives the tops added strength while reducing the possibility of the top splitting along its seams.


Our stock over 500 Maple Butcherblock tops is sufficient to cover most larger orders. We receive unfinished tops in truckload quantities direct from the mill. We first size and sand them, then round the edges, and then finish them in either an oiled or lacquered finish. (While lacquer finished tops have a nicer appearance for offices, the less expensive oiled finish is generally best for production and high use areas, as they can be resurfaced easily.
Most of our competitors use Ash, Alder, or combinations of other less expensive woods depending on the market price. Some don't round the edges or finish the ends.


! The longer the table, the weaker the table. To counter this, our eight foot long benches have 66% more steel in the understructure while ten foot long benches have 207% more steel there. These longer tables, even reinforced to this extent, will show some minor deflection in the center due to gravity.

! Height: Order these benches in any desired height. View accessories page for adjustable legs.

 
30" Deep Tops

Need a special height or size? We'll do it at the standard price.

Dimensions
D x L
Model
Quantity
12-45-910-2425+
Weight
30" x 30"CW3030
$307$285$275$268$263
$342$317$305$298$293
$410$380$366$358$351
$480$446$429$419$412
$551$511$492$480$472
121
30" x 36"CW3036130
30" x 48"CW3048143
30" x 60"CW3060165
30" x 72"CW3072187
Lead Time: Blue 1 Day, Green 1-5 Days, Orange 5-10 Days, Black 10 + Days.
Larger & Custom Orders Take Up to 14 Days.

Preferred for its hard surface, beauty and durability, the Solid Maple Butcherblock used by BenchPro™ is made from 1-3/4 thick strips of genuine Maple Hardwood. To prevent warpage and splitting, the wood is dried in a low-heat atmosphere for almost one year before it is cut into strips and glued edge to edge. The hardwood strips vary in width so that some strips are single and some strips are double wide. This gives the tops added strength while reducing the possibility of the top splitting along its seams.


Our stock over 500 Maple Butcherblock tops is sufficient to cover most larger orders. We receive unfinished tops in truckload quantities direct from the mill. We first size and sand them, then round the edges, and then finish them in either an oiled or lacquered finish. (While lacquer finished tops have a nicer appearance for offices, the less expensive oiled finish is generally best for production and high use areas, as they can be resurfaced easily.
Most of our competitors use Ash, Alder, or combinations of other less expensive woods depending on the market price. Some don't round the edges or finish the ends.


! The longer the table, the weaker the table. To counter this, our eight foot long benches have 66% more steel in the understructure while ten foot long benches have 207% more steel there. These longer tables, even reinforced to this extent, will show some minor deflection in the center due to gravity.

! Height: Order these benches in any desired height. View accessories page for adjustable legs.

 
36" Deep Tops

Need a special height or size? We'll do it at the standard price.

Dimensions
D x L
Model
Quantity
12-45-910-2425+
Weight
36" x 36"CW3636
$384$356$343$334$329
$466$432$416$407$399
$548$508$490$479$470
$630$585$563$550$540
132
36" x 48"CW3648154
36" x 60"CW3660176
36" x 72"CW3672198
Lead Time: Blue 1 Day, Green 1-5 Days, Orange 5-10 Days, Black 10 + Days.
Larger & Custom Orders Take Up to 14 Days.

Preferred for its hard surface, beauty and durability, the Solid Maple Butcherblock used by BenchPro™ is made from 1-3/4 thick strips of genuine Maple Hardwood. To prevent warpage and splitting, the wood is dried in a low-heat atmosphere for almost one year before it is cut into strips and glued edge to edge. The hardwood strips vary in width so that some strips are single and some strips are double wide. This gives the tops added strength while reducing the possibility of the top splitting along its seams.


Our stock over 500 Maple Butcherblock tops is sufficient to cover most larger orders. We receive unfinished tops in truckload quantities direct from the mill. We first size and sand them, then round the edges, and then finish them in either an oiled or lacquered finish. (While lacquer finished tops have a nicer appearance for offices, the less expensive oiled finish is generally best for production and high use areas, as they can be resurfaced easily.
Most of our competitors use Ash, Alder, or combinations of other less expensive woods depending on the market price. Some don't round the edges or finish the ends.


! The longer the table, the weaker the table. To counter this, our eight foot long benches have 66% more steel in the understructure while ten foot long benches have 207% more steel there. These longer tables, even reinforced to this extent, will show some minor deflection in the center due to gravity.

! Height: Order these benches in any desired height. View accessories page for adjustable legs.
Accessories
...
These fully-welded drawers hold up 100 lbs.
...
Choose from upright-mounted, riser or under-shelves.
...
Add fluorescent or LED lights above your workbench.
...
Add shelves lights or accessories above your workbench.
...
Add UL listed power strips to your workbench.
...
Add convenient bin access to your workbench.
...
Make your workbench mobile with these non-marring casters.
...
Add overhead storage to your workbench.
...
Add fixed or adjustable footrest for ergonomic comfort.
...
Add monitor arms, keyboard trays, CPU or document holders.
...
Convenient, upright-mounted tool storage.
...
Slidding shelf dividers further organize your storage.