Upright Mounted Specs:
- Meet ANSI, BIFMA, DIN and GSA Structural Standards.
- 180° Radius Front Edge
- Heaviest Grade Laminate Used.
- Painted Adjustable Brackets.
- Earthquake Proof Tube Over Tube Design.
- Shelf is Steel Reinforced.
- Adjusts in 1" Increments.
- Top Sealed in All 6 Sides.
- Exceeds Class 100 Standards.
- Weight Capacity: 150# Distributed Weight.
- Under-Shelf Bracket and Steel Top Reinforcement are Included.
- ! Order Uprights Separately.
Wall Mounted Specs:
- Meet ANSI, BIFMA, DIN and GSA Structural Standards.
- 180° Radius Front Edge
- Heaviest Grade Laminate Used.
- Painted Adjustable Brackets.
- Shelf is Steel Reinforced.
- Top Sealed in All 6 Sides.
- Exceeds Class 100 Standards.
- Weight Capacity: 80# Distributed Weight.
- Under-Shelf Bracket and Steel Top Reinforcement are Included.
! The wider the shelf, the weaker the shelf - even with our strong tubular understructure. To counter this, we recommend eight and ten foot shelves be supported with an additional upright in the center, Then put it up.
! Stainless Steel Uprights create a vital link between ESD shelves and ESD work surfaces.
Adjustable Top Shelf Assembly
1. The shelf has two screws installed at each end. Position the brackets with their fingers facing away from the rounded edge of the shelf and the bent over bracket parts facing each other as illustrated below. Lower the bracket over the heads of the screws and slide the bracket toward the front of the shelf. Tighten the screws.
2. Two people are needed to slide the fingers into the slots on the uprights.
3. Tap the shelf top near the uprights to slip the fingers down into position. It doesn't take much of a tap, and can be done with a closed hand.
4. The finger spacing should look like this.
