- Painted Adjustable Mounting Brackets.
- Top end Nevamar ESD Laminate.
- (10⁶ to 10⁹th Ohms/Square)
- Concealed Double Path to Ground.
- Steel Reinforced.
- Adjustable Height.
- Under-Shelf Bracket and Steel Top Reinforcement are Included.
! The wider the shelf, the weaker the shelf - even with our strong tubular understructure. To counter this, we recommend eight and ten foot shelves be supported with an additional upright in the center, Then put it up.
! Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties.
Grant Series - Top Shelf Assembly
1. Fit the two holes in the brackets over the screw heads extending from the bottom of the shelf with the large part of the bracket facing off the end of the shelf as shown. Tighten the screws.
2. Attach to uprights by sliding the T-Head bolts down from the top of the uprights to your desired position.
3. Tighten the Nylock fasteners securely.
